Author Topic: Disc valve 180 degrees out?  (Read 195 times)

0 Members and 1 Guest are viewing this topic.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1035
Disc valve 180 degrees out?
« on: July 09, 2017, 09:23:06 PM »
Gday all
There's been a few posts about putting the valves in 180 degrees out could someone tell me how this is possible as far as I can tell it can only go in one way as there keyed and marked unless the collar can go in upside down ?
Cheers

Online BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 566
Re: Disc valve 180 degrees out?
« Reply #1 on: July 10, 2017, 07:51:34 AM »
   Hi Coxy,
                  You are correct in what you say for the right, drive side end of the crank.

      The collar can only be fitted in one position over the pin on the crank. However, the disc valve can be fitted to the collar in two positions, 180degs apart,  due to the spline arrangement. If the manual instructions are followed, incorrect fitting of R/H disc is unlikely to happen, just line up all the dots and the pin.  This is why it is important to fit the right disc first.

          When it comes to the left end of the crank which is drilled right through, it is easily possible to fit the collar or disc 180degs out of position and it has happened. The crank end does not have a dot to guide you, so fit the right disc first and then make sure the left disc is installed at 180degs to it. (Then put a dot on the crank end for future reference). 
         If just the left side is stripped, the disc can be correctly installed by putting the left piston at TDC and installing the collar / disc so that the intake port is open.

     Here's a link to a recent post on a similar theme (will post when I find it) showing pictures of the of the crank ends with discs fitted.                                                     Brian.
« Last Edit: July 11, 2017, 04:43:43 AM by BRT-GTR »
Growing old is compulsory, Growing up is optional.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1035
Re: Disc valve 180 degrees out?
« Reply #2 on: July 14, 2017, 03:17:05 PM »
thanks Brian very interesting cheers

Online BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 566
Re: Disc valve 180 degrees out?
« Reply #3 on: July 18, 2017, 05:48:42 AM »
             Found the link to the post I mentioned, see photos at end.

                 http://bridgestonemotorcycleparts.com/index.php?topic=4070.msg23092#msg23092
Growing old is compulsory, Growing up is optional.

 


Gallery


Views:33
Comments (0)
By: busagsx1300

Views:26
Comments (0)
By: busagsx1300

Views:58
Comments (0)
By: AlanJohn

Views:64
Comments (0)
By: AlanJohn

Classifieds

License Plate Frame

Date: 07/18/2017 06:13 pm
Time Left: 84d 12h 37m
175/200 Gas Tank

Price: $0.00
Date: 07/13/2017 03:28 pm
Time Left: 79d 9h 51m
Seat

Price: $0.00
Date: 07/13/2017 03:24 pm
Time Left: 79d 9h 48m
Rockford 2 Cycle Oil

Price: $0.00
Date: 06/14/2017 04:29 pm
Time Left: 50d 10h 53m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 29
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 55
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 39
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 85
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal