Author Topic: 350 Head Gaskets  (Read 261 times)

0 Members and 1 Guest are viewing this topic.

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 407
350 Head Gaskets
« on: June 19, 2017, 09:10:20 AM »
Just noticed that both head gaskets are leaking out the front. They are the new copper type gaskets. When idling, I can clearly see oil oozing out of the front of both heads.

I removed both heads and cleaned up all the threads making sure each nut had free travel all the way down the bolts. I also verified that the nuts were not bottoming out on the bolt threads before snugging up - there is plenty of thread left once the nuts come in contact with the washers on the heads. I checked the head gaskets for burrs or imperfections and they both seem fine. I also checked the heads and cylinders for imperfections on the mating surfaces and found nothing. Gasket thickness seems to be a consistent .075 mm.

Any ideas or suggestions?

Dan
1966 175 DT and 1968 350 GTR

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 936
Re: 350 Head Gaskets
« Reply #1 on: June 19, 2017, 10:01:29 AM »
Just reuse the copper gaskets.  Heat them with a torch until red hot to anneal (soften) them, but not hot enough to melt.  Put a light coat of copper gasket cement on both sides.  I use the spray gasket sealer and lay them out on a paper towel and give them a light spray, flip them and spray the other side.  Put them and the heads back on and torque the nuts to 18-21 ft. lb.

Checking the heads to make certain they are reasonably flat first is a good idea. A good straightedge will work as a check, although rubbing the head on a sheet of 280-400 grit wet-or-dry paper on a sheet of glass or a nice flat workbench will tell you a lot, also, and you can use that to true them up if needed.
« Last Edit: June 19, 2017, 10:05:42 AM by OldSwartout »
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 407
Re: 350 Head Gaskets
« Reply #2 on: June 20, 2017, 07:21:01 AM »
Thanks Karl. I checked the heads with a straight edge and cant see any imperfections. I tried your head and gasket cement suggestion last night. Didn't have the opportunity to fire it up after getting it all back together but will kick it over tonight and hope for the best.

Dan
1966 175 DT and 1968 350 GTR

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 407
Re: 350 Head Gaskets
« Reply #3 on: June 21, 2017, 07:23:02 AM »
Started on the first kick and no more head gasket leaks. Ran around the neighborhood last night and I'm sure my homeowners association is working on getting me out of there. Nothing like the loud crack of a 2 stroke ripping up the streets at 10 pm in a typically clam and quiet residential neighborhood.

Dan
1966 175 DT and 1968 350 GTR

Offline husker

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 117
Re: 350 Head Gaskets
« Reply #4 on: June 21, 2017, 08:24:21 AM »
May have to try your suggestion Karl as both of my head gaskets are leaking oil too.  Got another 1st place trophy in the import division at the Awesome Biker Nights in Sioux City, IA..........Rod
1968 Bridgestone GTR350,  1971 Kawasaki A7SS, 1983 KZ750 LTD

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1341
Re: 350 Head Gaskets
« Reply #5 on: June 21, 2017, 11:08:58 AM »
The Husker just keeps rolling....Nice going, Rod.
...bert

 


Gallery


Views:33
Comments (0)
By: busagsx1300

Views:26
Comments (0)
By: busagsx1300

Views:58
Comments (0)
By: AlanJohn

Views:64
Comments (0)
By: AlanJohn

Classifieds

License Plate Frame

Date: 07/18/2017 06:13 pm
Time Left: 84d 18h 48m
175/200 Gas Tank

Price: $0.00
Date: 07/13/2017 03:28 pm
Time Left: 79d 16h 2m
Seat

Price: $0.00
Date: 07/13/2017 03:24 pm
Time Left: 79d 15h 58m
Rockford 2 Cycle Oil

Price: $0.00
Date: 06/14/2017 04:29 pm
Time Left: 50d 17h 4m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 29
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 55
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 39
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 85
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal