Author Topic: 350 Crank Pin Size?  (Read 640 times)

0 Members and 1 Guest are viewing this topic.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1900
350 Crank Pin Size?
« on: March 21, 2017, 07:27:33 PM »
Would anyone happen to have measurements for the 350 crank pins?  Length & diameter?
Confucius say... "Better to have Bridgestone than Kidneystone"

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1900
Re: 350 Crank Pin Size?
« Reply #1 on: March 22, 2017, 05:29:59 PM »
Update: I been informed that they are 24mm x 52.6mm.  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline bert Lilley

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 20
Re: 350 Crank Pin Size?
« Reply #2 on: March 23, 2017, 10:54:45 AM »

  Just Happen to have one on my Desk  :- Pin Diameter = 0.945" in Dia x 25.4 = 24mm dia. 
                                                       
                                                                  Pin Length = 2.072" x 25.4 = 52.6mm Long.

Hope this Helps  Bert

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1900
Re: 350 Crank Pin Size?
« Reply #3 on: March 23, 2017, 07:55:13 PM »
Thank you for the confirmation Bert..... and yes, it does help.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 111
Re: 350 Crank Pin Size?
« Reply #4 on: March 25, 2017, 09:24:09 AM »
What information is available regarding the heat treat on these pins? 

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 946
Re: 350 Crank Pin Size?
« Reply #5 on: March 25, 2017, 12:20:42 PM »
Crank pins are typical bearing journal specs, RC60-62 hardness. They can be relatively soft core, RC30-45 with either a nitrided case that will be .007-.015 deep or carburized which should provide from .020-.050 case depth. With the nitride heat treat, there's not much depth for finish grind after plus the thin case needs a harder core for support.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline bsracer

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 283
Re: 350 Crank Pin Size?
« Reply #6 on: March 26, 2017, 03:05:50 AM »
I just cut down some 175 pins to use for the crank jig and they were not soft in the center! Amazing how tough those things can be!

paul

 


Gallery


Views:9
Comments (0)
By: AlanJohn

Views:7
Comments (0)
By: AlanJohn

Views:7
Comments (0)
By: AlanJohn

Views:7
Comments (0)
By: AlanJohn

Classifieds

350 GTR/GTO Dynamo Points Base Plate & Case Screws

Price: $0.00
Date: 09/14/2017 01:44 pm
Time Left: 81d 17h 25m
SUPER RARE 1965 BRIDGESTONE HUMP BACK SPORT 90.

Price: $1400.00
Date: 09/03/2017 02:02 pm
Time Left: 70d 17h 43m
Searching For Parts To Complete A 350 GTR

Date: 09/02/2017 05:19 pm
Time Left: 69d 21h 1m
Handle Bars with controls
Date: 08/17/2017 04:27 pm
Time Left: 53d 20h 8m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal