Author Topic: 100Trail & TMX specs  (Read 2145 times)

0 Members and 1 Guest are viewing this topic.

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 85
100Trail & TMX specs
« on: February 03, 2017, 04:49:12 PM »
Although we've got some great downloads to work with, thanks to Richard & others, The service manuals that are denoted as "use for 100's also", come up short for the tube frame bikes. There are no engine specs anywhere for the 100. Can someone give me the stock bore spec and wear limit, (if applicable), for the aluminum cyl. 100 trail & TMX please? Many thanks.

........KP
'69 Mach II RS, '67 350 GTR, '66 Sport 90 o.i., '65 90M Surf Rider, '68 100 Trail, '71 100 TMX ,'79 Honda CBX, '82 Yam 650 Turbo, '74 Norton 850 Hi-Rider, '70 Triumph 500 Trophy, '75 Suz. GT-380.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 676
Re: 100Trail & TMX specs
« Reply #1 on: February 04, 2017, 07:36:42 AM »
               Great collection of bikes there KP,  spec for 100 cylinder?.................. who cares, ride one of the others  ;D   lol,

    Can't give a dimension for the pot but  using data from other BS chrome bores, once there is 5-6 thou or more clearance on the piston it's time to renew something.
            Brian.
Unspoiled by progress.

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1016
Re: 100Trail & TMX specs
« Reply #2 on: February 04, 2017, 09:43:10 AM »
The 90 Sport and 175 specify .001 in. minimum and .003 in. maximum piston clearance, use similar numbers for 100/200 cylinders. They'll run OK with some more than that, though.

I hadn't realized there weren't published specs for the 100/200 cylinders/pistons until now, but I didn't find any either.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 85
Re: 100Trail & TMX specs
« Reply #3 on: February 04, 2017, 11:35:38 AM »
Thanks Guys. I knew the piston to wall clearance would be the same as the other chrome bore cylinders. I was looking for the actual bore spec. I went back to downloads and pulled it out of a 100 Sport brochure. 53mm. I had purchased a used cylinder and wanted to double check for wear and taper before installing. The bore plating itself looks pretty good. No chipping around ports, etc.  Once you get past .003 on clearance you risk breaking a skirt, which usually spells death for a nikasil or chrome bore.

Cheers,
.....KP

Brian.....I'd love to ride anything right now, but there's 18" of snow in my front yard!
'69 Mach II RS, '67 350 GTR, '66 Sport 90 o.i., '65 90M Surf Rider, '68 100 Trail, '71 100 TMX ,'79 Honda CBX, '82 Yam 650 Turbo, '74 Norton 850 Hi-Rider, '70 Triumph 500 Trophy, '75 Suz. GT-380.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1973
Re: 100Trail & TMX specs
« Reply #4 on: February 04, 2017, 11:38:48 AM »
Info from a Clymer manual....
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 85
Re: 100Trail & TMX specs
« Reply #5 on: February 04, 2017, 11:46:56 AM »
Thanks pup. Always good to hear from you.

.......KP
'69 Mach II RS, '67 350 GTR, '66 Sport 90 o.i., '65 90M Surf Rider, '68 100 Trail, '71 100 TMX ,'79 Honda CBX, '82 Yam 650 Turbo, '74 Norton 850 Hi-Rider, '70 Triumph 500 Trophy, '75 Suz. GT-380.

Offline Dukenuke

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 1
Re: 100Trail & TMX specs
« Reply #6 on: March 19, 2017, 12:16:34 PM »
Hello everyone. I am restoring a 71 TMX 100. Wondering if anyone has the paint specs for the grey on the front forks as well as the headlight bowl etc. let me know what you know! Thanks.

David

 


Gallery


Views:22
Comments (1)
By: fahrkle

Views:57
Comments (1)
By: Geoff S

Views:53
Comments (0)
By: AlanJohn

Views:65
Comments (3)
By: mybridgestones

Classifieds

Misc 1968 Bridgestone 90 parts wanted
Date: 04/16/2018 03:09 pm
Time Left: 84d 0h 37m
Neutral switch for 350
Date: 04/15/2018 03:14 pm
Time Left: 83d 0h 42m
GTO diffuser seals
Date: 04/08/2018 04:27 am
Time Left: 75d 13h 55m
GTO stingers diffusers
Date: 04/02/2018 06:29 am
Time Left: 69d 15h 56m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal