Author Topic: 1965 BS Sport 90 Engine Work  (Read 1695 times)

0 Members and 1 Guest are viewing this topic.

Offline stingray68

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 55
1965 BS Sport 90 Engine Work
« on: March 07, 2016, 08:20:29 AM »
Hello All,

   Well, I have soaked the piston in this 1965 Sport 90 that I picked up and no movement yet....At this point, I am ready to pull the motor and send it off to get the cylinder work done along with piston and rings. I was wondering if anyone here has any suggestions as to what my next step should be.  I am not looking to do a ground up resto on this bike, just clean it up, get it running and ride it to work once in a while and maybe around the lake once a summer.  Thank you all in advance for your input.....Mike

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 83
Re: 1965 BS Sport 90 Engine Work
« Reply #1 on: March 07, 2016, 09:41:13 AM »
From your description, you're probably headed to the machine shop anyway, even if you get it lossened up. One important thing would be to make sure there is nothing else locked up, making it appear it's the motor, (broken trans, clutch, etc.). I have, on occasion, loosened a stuck piston by liberally using light penetrating oil in the cylinder, then putting the bike in 1st gear and rocking it back and forth, bumping the motor. This way you're trying to move it in both directions. Using the kick starter isn't always the most effective. Best of luck, and enjoy it when you're done!

...KP
'69 Mach II RS, '67 350 GTR, '66 Sport 90 o.i., '65 90M Surf Rider, '68 100 Trail, '71 100 TMX ,'79 Honda CBX, '82 Yam 650 Turbo, '74 Norton 850 Hi-Rider, '74 Kaw H1F 500 Mach III, '75 Suz. GT-380,

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 383
  • 1968 BS 350 GTR
Re: 1965 BS Sport 90 Engine Work
« Reply #2 on: March 07, 2016, 05:30:07 PM »
I agree with KP. If you add oil in the cylinder and rock it back and forth,
while it is in gear, it may loosen up and make it easier to take apart.

Randy

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1351
Re: 1965 BS Sport 90 Engine Work
« Reply #3 on: March 07, 2016, 05:37:05 PM »
Good luck with your project, Mike. There are many degrees of "stuckness", some will loosen with the rocking technique, others require dynamite. ;D
Hopefully yours is a "rocker".
...bert

Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 134
Re: 1965 BS Sport 90 Engine Work
« Reply #4 on: March 07, 2016, 09:42:33 PM »
i used the block of wood and a big ass hammer once.... ;D  and i,ll be damed itworked.....its most likely the rings are stuck to the walls ;D   but i have found the bottom end filled with water to on a yamaha i was going to fix..... that one is junk now... only good for some parts 8)

Offline mqtsteve

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 250
  • (2) BS90 Sport , BS90 Trail, BS90 Mountain
Re: 1965 BS Sport 90 Engine Work
« Reply #5 on: March 08, 2016, 06:45:01 AM »
I've heard of people using a hot plate(electric stove top) to warm the engine up.  After it's warm try rocking it.  You may need to get a little more aggressive.  Good luck! Steve
Steve S.
4/1966 BS90 Sport(o.i.), 5/1966 BS90 Sport(o.i.),
1965 BS90 Trail, 1965 BS90 Mountain

Offline Ken54

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 1
Re: 1965 BS Sport 90 Engine Work
« Reply #6 on: March 17, 2016, 09:56:12 AM »
If you have it available, watch the History Chanel's American Restoration episode #154, where they show how they heated a 100 yr old motorcycle to loosen a frozen piston. 

 


Gallery


Views:17
Comments (3)
By: mybridgestones

Views:43
Comments (2)
By: OldSwartout

Views:58
Comments (2)
By: AlanJohn

Views:35
Comments (0)
By: AlanJohn

Classifieds

Bridgestone GP 100 Muffler

Price: $80.00
Date: 12/03/2017 12:52 pm
Time Left: 81d 7h 39m
4 motorcycles for sale
Price: $0.00
Date: 12/02/2017 02:41 pm
Time Left: 80d 9h 28m
1969 Bridgestone dual 175

Price: $0.00
Date: 11/29/2017 11:17 am
Time Left: 77d 6h 4m
1969 Bridgestone dual 175
Price: $0.00
Date: 11/29/2017 11:13 am
Time Left: 77d 5h 59m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal