Author Topic: 1964 BS90 Ignition Key continued  (Read 1489 times)

0 Members and 1 Guest are viewing this topic.

Offline Kickstand80

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 2
1964 BS90 Ignition Key continued
« on: March 03, 2016, 04:03:36 PM »
Sorry, I don't know how to post more photos to one post, it says a max of 3, so this is the continuation.

Photo 4, Here is what you will find inside. Match mark the triangle contact piece so it can be put back in the correct place. There is a spring under the contact, but the lock will not pop apart, there is not that much pressure it. The triangle contact has a tab on the bottom so you will not be able to reassemble it incorrectly. Clean the corrosion of the contact. Pull the contact and you will see a circular plastic piece that the spring sits in. That piece has a pass thru contact, it may fall apart when you pull it out. There are 4 pieces to it. Two small brass contacts, one sticks out the top and one out the bottom and in between is a spring and retainer. Not difficult to figure out if it falls out. I cleaned the bottom side of the top cover, where the wires are soldered to. I used a flat file to make everything smooth and shinny.

Photo 5, all the parts from inside. You can now see the 2 screws that hold the lock core in place.

Photo 6, is the lock core removed. You can mow take this to any locksmith and they should be able to find the correct key blank and cut you a new key. If you have never taken a lock core apart, now is not the time to try it. There are 4 VERY VERY small springs in the core that you will loose of you try to disassemble this.

Clean everything, a light coat of dielectric grease when you reassemble the switch can be put on the contact triangle and the bottom of the cover. Just a FYI the # that is on my lock is 949, which according to Key Man means nothing usefull. I have my lock at the locksmith and will post the manufacturer and key code when I get them back.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1366
Re: 1964 BS90 Ignition Key continued
« Reply #1 on: March 03, 2016, 04:13:11 PM »
Hey Kickstand80. You can just reply to your own post and that eliminates the need to start a new thread. This looks like a pretty ambitious project, hope it works out well. Welcome to the fun!
...bert

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 85
Re: 1964 BS90 Ignition Key continued
« Reply #2 on: March 04, 2016, 01:02:31 AM »
Welcome to the BS community, Kickstand80; Just a heads up; Those key codes are more common than you think. I just bought two from a vendor on Ebay for 2 of my BS bikes, #'s 513 & 911, and they fit, and work perfectly. They typically range anywhere from 10-20$. The Ebay vendor I used, (your trash-my treasures), has your key #949 listed in his inventory in the same ad I purchased from. He's in Texas. Great to work with.
 The 4 springs you refer to are for the timbler pins, and all of that is very delicate and important to the lock function. Interestingly, I just purchased a '66 90 Sport, and it had no keys. It had been stored in a garage for decades. I found 2 keys on an original dealer inventory keytag inside the headlamp bucket. Apparently put there as a spare, or when stored for antitheft purposes. Best of luck on all your future Bridgestone adventures, and Welcome!
'69 Mach II RS, '67 350 GTR, '66 Sport 90 o.i., '65 90M Surf Rider, '68 100 Trail, '71 100 TMX ,'79 Honda CBX, '82 Yam 650 Turbo, '74 Norton 850 Hi-Rider, '70 Triumph 500 Trophy, '75 Suz. GT-380.

 


Gallery


Views:18
Comments (0)
By: harleywaynecycles

Views:17
Comments (0)
By: harleywaynecycles

Views:14
Comments (0)
By: harleywaynecycles

Views:7
Comments (0)
By: harleywaynecycles

Classifieds

350 engine carb covers left an right show quality
Price: $0.00
Date: 11/18/2018 06:13 pm
Time Left: 87d 6h 24m
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:52 pm
Time Left: 494d 12h 3m
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:51 pm
Time Left: 494d 12h 2m
[ebay] ‘67 175 DT - no reserve
Price: $0.00
Date: 11/09/2018 10:20 am
Time Left: 77d 22h 31m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal