Author Topic: disassembling rear shock cushion  (Read 1458 times)

0 Members and 1 Guest are viewing this topic.

Offline verygary

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 26
disassembling rear shock cushion
« on: December 04, 2015, 09:52:21 PM »
Tomorrow's project is to disassemble the rear shocks on the 90 Mountain.  It appears there is a 14mm nut under the bottom bolt bracket, between the bracket and the chrome cover.  Am I right in thinking that if I get a wrench (have to grind one thinner fit) on the nut, the bracket will unscrew and the whole think will come appart?  The Hondas I've worked on came appart from the top.  Can't tell you how nice it is to be able to ask a question and get thoughful responses before charging ahead and breaking something.  Thanks.

Offline verygary

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 26
Re: disassembling rear shock cushion
« Reply #1 on: December 04, 2015, 11:36:29 PM »
Disregard question as I found answer in a much earlier post.  I'll get the hang of using this forum eventually.  Thanks for your patience.
Gary

Offline Jeff Bar

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 400
Re: disassembling rear shock cushion
« Reply #2 on: December 05, 2015, 11:01:40 AM »
Gry,,There is a nice topic about shock repair see

http://bridgestonemotorcycleparts.com/index.php?topic=932.0

Offline verygary

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 26
Re: disassembling rear shock cushion
« Reply #3 on: December 06, 2015, 02:14:33 PM »
Thanks for the link.  Got the shocks apart and learned a couple things.  Had to buy a junky 14mm wrench and grind it thinner to fit between the bolt bracket and the chrome cover.  Also, had to use a couple jam nuts to get the 14mm bolt/washer off the threaded shaft so I could get the plastic cover off. 

 


Gallery


Views:34
Comments (0)
By: Geoff S

Views:37
Comments (0)
By: AlanJohn

Views:50
Comments (3)
By: mybridgestones

Views:73
Comments (2)
By: OldSwartout

Classifieds

ISO / WTB: RH 350 head
Date: 02/13/2018 04:22 am
Time Left: 80d 14h 58m
Rear Carrier

Price: $0.00
Date: 01/23/2018 04:33 pm
Time Left: 30d 3h 9m
Solo seat

Price: $0.00
Date: 01/23/2018 04:29 pm
Time Left: 30d 3h 5m
**Updated** GTR/GTO Wiring Package.

Price: $0.00
Date: 01/10/2018 10:40 am
Time Left: 46d 21h 16m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal