Author Topic: Paint advice  (Read 965 times)

0 Members and 1 Guest are viewing this topic.

Offline Gizo

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Paint advice
« on: February 14, 2015, 11:51:49 PM »
I am painting my 175dt, 
I took the tank side cove and oil tank back to bare metal,  primed, etc.
I have just sprayed colour,
6 coats of colour, 5 coats of clear all acrylic ( I know 2k is better,  but first attempt at painting, and was advised to do acrylic).
Anyway I got the colour nice and even, the clear coat had a bit of orange peel, I sanded the clear coat,  when I noticed pin holes in the clear,  ?    Any ideas what they might be from?  Do I sand them out or keep buffing till they are gone?  I could not see them when I sanded they only showed after buffing. Photo do not show it,  the White spots are just polish
Any advice appreciated

 


Gallery


Views:25
Comments (1)
By: fahrkle

Views:59
Comments (1)
By: Geoff S

Views:53
Comments (0)
By: AlanJohn

Views:65
Comments (3)
By: mybridgestones

Classifieds

Seat Pan, Seat or quality cover
Date: 04/23/2018 02:27 pm
Time Left: 89d 21h 1m
Misc 1968 Bridgestone 90 parts wanted
Date: 04/16/2018 03:09 pm
Time Left: 82d 21h 42m
Neutral switch for 350
Date: 04/15/2018 03:14 pm
Time Left: 81d 21h 47m
GTO diffuser seals
Date: 04/08/2018 04:27 am
Time Left: 74d 11h 0m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal