Author Topic: GTO oil tank  (Read 1486 times)

0 Members and 1 Guest are viewing this topic.

Offline lockhart

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
GTO oil tank
« on: November 23, 2017, 11:39:11 AM »
Have two oil tanks off two restored Go's which are cracked in the same position. Have tried various glues but nothing will stick once oil is replaced in the tanks. Any suggestions on how I can make a repair.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2088
Re: GTO oil tank
« Reply #1 on: November 23, 2017, 11:54:31 AM »
Hi lockhart.... a while back I asked the same question about a cracked tank I had and several proposals were put forth. I ended up selling the tank "as is" and never tried any repairs.

I've posted the link to that thread below.... you might see something there that you'd want to try out.

http://bridgestonemotorcycleparts.com/index.php?topic=3862.msg21400#msg21400
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 776
Re: GTO oil tank
« Reply #2 on: November 24, 2017, 06:57:29 AM »
              As a relatively new GTO owner, I'd be interested to know where the tanks have cracked.  Photo?

    After a lifetime of repairing things, kid's toys etc, the only reliable method of joining these soft plastics is heat welding which is not easy.   You could try a local car repair shop, see if they have a specialist plastic welder. It's amazing what some of these guys can repair these days.
Unspoiled by progress.

Offline lockhart

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Re: GTO oil tank
« Reply #3 on: November 27, 2017, 12:02:11 PM »
Thanks for the info guys. Tried the glue mentioned but no joy. Both tanks are cracked at the bottom of the rear mounting point. Photo show both tanks with cracks at the same point. Is this a know area  for damage


Offline lockhart

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Re: GTO oil tank
« Reply #4 on: November 27, 2017, 12:07:26 PM »
These are the two restored GTO,s plus a before photo.Both off the road due to leaking oil tanks

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2088
Re: GTO oil tank
« Reply #5 on: November 27, 2017, 12:23:00 PM »
Since the cracks are in an area that would be hard to be seen, have you given any thoughts about patching with fiberglass? This would also add strength to the area.
« Last Edit: November 27, 2017, 01:28:11 PM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 776
Re: GTO oil tank
« Reply #6 on: November 28, 2017, 03:42:35 PM »
                Thanks for the photos of the cracks, that's very informative.  I think the plastic oil tank on the GTO was a genuine first for Bridgestone, they were finding the way, should have been rubber mounted but that's easy to say now !

    I believe the tanks were made from a high density polyethylene type plastic which is notoriously difficult, if not impossible to glue due to it's waxy nature.   Could you consider a stickon rubber patch which would be held in place by the frame tube. Just a thought, might work.

   Great job on the GTOs, they look really nice. The white tank with black stripe is growing on me  8)

« Last Edit: November 28, 2017, 03:49:33 PM by BRT-GTR »
Unspoiled by progress.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 776
Re: GTO oil tank
« Reply #7 on: December 07, 2017, 06:57:16 AM »
           The plastic tank shown in this video is very similar in character to the GTO oil tank, although somewhat bigger. Shows what can be achieved with the right kit and experience. Our tanks are too scarce to throw away, I believe heat welding is the way forward.

       
Unspoiled by progress.

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2088
Re: GTO oil tank
« Reply #8 on: December 08, 2017, 10:10:56 AM »
 iagree   +1
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline billmo

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 1
Re: GTO oil tank
« Reply #9 on: December 13, 2017, 10:03:56 PM »
I would be interested in buying an oil tank if anyone has a cracked one they'd like to sell.  I have a neighbor with a plastic welder and may be able to get it to hold oil.  My GTO didn't come with a tank.  Thanks in advance.
Billmo

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2088
Re: GTO oil tank
« Reply #10 on: December 20, 2017, 04:29:58 PM »
SOLD.......
« Last Edit: December 20, 2017, 10:42:10 PM by moonpup »
Confucius say... "Better to have Bridgestone than Kidneystone"

 


Gallery


Views:14
Comments (0)
By: harleywaynecycles

Views:16
Comments (0)
By: harleywaynecycles

Views:12
Comments (0)
By: harleywaynecycles

Views:6
Comments (0)
By: harleywaynecycles

Classifieds

Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:52 pm
Time Left: 497d 6h 10m
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:51 pm
Time Left: 497d 6h 9m
[ebay] ‘67 175 DT - no reserve
Price: $0.00
Date: 11/09/2018 10:20 am
Time Left: 80d 16h 38m
Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 56d 16h 27m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal