Author Topic: 350 Running rich ? - Check your choke plungers.  (Read 172 times)

0 Members and 1 Guest are viewing this topic.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 632
350 Running rich ? - Check your choke plungers.
« on: September 22, 2017, 12:01:51 PM »
             My GTO was coughing, spluttering and snatching on light load, was almost unrideable. Despite having correct float levels, 25 pilots, 130 mains and needle clips second from top she still seemed to be running rich.  I was sure the choke plungers were seating but they were the only source of overfueling left.
           Pulled them out, prised out the tip rubbers (rock hard but NOS carbs) with a sharp point and needlenose pliers. Original rubber disc diameter was probably 7mm but only had a quarter inch punch. So stamped a couple of 2mm thick viton rubber (Ebay) discs. Put these in at an angle and used a small blunt screwdiver to press the sides in and down into the recess, working round the tip.  Refitted to carbs and made sure there was a bit of slack in the choke cable at the lever end.
         What a difference, she now runs smoothly at low revs and is pleasant to ride. So that's another issue cured, still vibrating at higher revs but will sort that in due course.

           Brian.
« Last Edit: September 23, 2017, 06:21:58 AM by BRT-GTR »
Unspoiled by progress.

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1937
Re: 350 Running rich ? - Check your choke plungers.
« Reply #1 on: September 22, 2017, 01:29:27 PM »
Great tip Brian, thanks for taking the time to post it!  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline CL-100

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 248
  • CL-100
Re: 350 Running rich ? - Check your choke plungers.
« Reply #2 on: September 22, 2017, 04:04:19 PM »
Brian,

I've followed the thread on this subject on Yahoo Bridgestone and thought it was so useful that I printed it out and filed it with other jewels of information like this.  I'm in the process of gathering parts for a BS50 restoration as well as a 350 resto-mod I'm going to do in cafe racer style.  I do have a NOS set of carbs for the 350 project but I'm probably going to check the plungers on them.

I can't tell you how many times I've heard of carb problems with 350's that were only fixed by changing to different carbs.  There could be a whole lot of used carbs still in use with this fix!

Thanks for passing the good info on.

Rowland

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 383
  • 1968 BS 350 GTR
Re: 350 Running rich ? - Check your choke plungers.
« Reply #3 on: September 22, 2017, 06:24:54 PM »
Good to know.

Thank you.

Randy

 


Gallery


Views:17
Comments (3)
By: mybridgestones

Views:43
Comments (2)
By: OldSwartout

Views:59
Comments (2)
By: AlanJohn

Views:37
Comments (0)
By: AlanJohn

Classifieds

Bridgestone GP 100 Muffler

Price: $80.00
Date: 12/03/2017 12:52 pm
Time Left: 80d 8h 42m
4 motorcycles for sale
Price: $0.00
Date: 12/02/2017 02:41 pm
Time Left: 79d 10h 32m
1969 Bridgestone dual 175

Price: $0.00
Date: 11/29/2017 11:17 am
Time Left: 76d 7h 7m
1969 Bridgestone dual 175
Price: $0.00
Date: 11/29/2017 11:13 am
Time Left: 76d 7h 3m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal