Author Topic: BS - FTR 175  (Read 1747 times)

0 Members and 2 Guests are viewing this topic.

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
BS - FTR 175
« on: August 28, 2017, 04:09:31 AM »
Hi All,

Three years after downsizing and getting back on top of life. I have found time to look around and see what is left. This DT 175 was dragged along and left out the back of the workshop. I also had a crashed Honda FTR 250, minus engine that a friend left with me. Tank & seat section in good condition.

After a brain fart, why not a BS FTR 175 ?... Ceriani forks sitting with Richard Clark for years finally made it back to me. Have a set of SR carb covers, carbs, valve covers and a few other bits to rebuild the engine. Lets make noise !!

Will need to build a set of expansion chambers and plan to have them both come out on the right side.

Aiming to spend the least amount possible and use all the stuff in boxes to make the build.

later ... ray




Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #1 on: August 28, 2017, 04:12:01 AM »
Oops ... forgot some photo's

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #2 on: August 29, 2017, 05:01:27 AM »
Lady luck was on the side of this DT. Has been out in all weather and yet the cylinders just slid off the pistons !!.... Both pistons were blocking the exhaust ports and am assuming the rotary valves are also blocking off the crank. As no water or corrosion in the crankcases.

 banana

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1366
Re: BS - FTR 175
« Reply #3 on: August 29, 2017, 11:39:29 AM »
Nice project Ray! Rock and Roll!
...bert

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #4 on: October 03, 2017, 07:48:48 AM »
A little progress made. Wheels rebuilt so as to get a rolling chassis. Need to do a full dry build to make sure I have everything cut off that is not needed and new bits welded on to frame that are needed ?... before stripping it and getting frame & tank painted. Looking at KTM orange.

Picked up a set of pipes that will need some cutting & welding to make fit. They will do for now till I find the time & energy to custom make a set coming out on right side.

later .. ray 

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #5 on: October 05, 2017, 03:50:43 AM »
After opening up the silencers, decided to cut the end cans off and expose the expansion chamber ends. Need to graft on standard header pipes. Makes it possible to have both pipes out on the right side. Some creative bracketing needed yet, doable.


Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #6 on: November 11, 2017, 08:10:49 AM »
Motor is next.

Offline old smokey

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 685
Re: BS - FTR 175
« Reply #7 on: December 14, 2017, 11:16:57 AM »
Nice!
Edited, obviously wrong selection of icons
« Last Edit: December 19, 2017, 08:36:48 PM by old smokey »
'67 350 GTR undergoing repairs with a '75 Yamaha TX500 front end

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 416
  • 1968 BS 350 GTR
Re: BS - FTR 175
« Reply #8 on: December 15, 2017, 02:50:47 PM »
It looks like you are doing a great job!

Keep the pictures coming.

Thank you.

Randy


Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #9 on: May 22, 2018, 05:25:06 AM »
Well the mutt is running and will waken the dead and smells great on Castrol R .... hahaha ... Not sure what to do with it now.

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 70
Re: BS - FTR 175
« Reply #10 on: May 22, 2018, 05:26:02 AM »
One more pic

 


Gallery


Views:23
Comments (0)
By: harleywaynecycles

Views:20
Comments (0)
By: harleywaynecycles

Views:17
Comments (0)
By: harleywaynecycles

Views:9
Comments (0)
By: harleywaynecycles

Classifieds

BS Keychain (SOLD)

Price: $0.00
Date: 11/23/2018 12:51 pm
Time Left: 67d 21h 11m
350 engine carb covers left an right show quality SOLD!!!
Price: $0.00
Date: 11/18/2018 06:13 pm
Time Left: 63d 2h 33m
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:52 pm
Time Left: 470d 8h 12m
[ebay] ‘67 175 DT - no reserve
Price: $0.00
Date: 11/09/2018 10:20 am
Time Left: 53d 18h 41m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal