Author Topic: Seized throttle cable assy  (Read 605 times)

0 Members and 1 Guest are viewing this topic.

Offline EddieMello

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 4
  • 1966 175 DT
Seized throttle cable assy
« on: May 22, 2017, 01:20:02 AM »
My poor 175 has not been run in 30 years. It appears to in pretty good shape in many respects but the obvious problem I have is the throttle cable assembly does not want to move when I turn the handle bar throttle grip. I don't know if the grip is the problem or if the slide is stuck in the carburetor or maybe the cable in between. Anyone have ideas as to the best methods to lubricate these components? I know the manual says to lubricate the cables frequently but I am not sure how that is accomplished. I did squirt some WD-40 into the 1 into 2 cable housing and I could squirt some 'carburetor slide and linkage cleaner' into the carburetor. Not sure about the grip, I hate to take it off if I don't need to. Thanks!
Ride fast and live long!

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 997
Re: Seized throttle cable assy
« Reply #1 on: May 22, 2017, 08:57:36 AM »
You can remove the two screws in the throttle housing on the handlebar, lift off the top and get some lube into the upper end of the cable without actually having to remove the cable.

For a thorough lube with any cable unhooked at the upper end, use one of these:
Karl Swartout
Mooresville, IN
BS175 Roadracer

Offline EddieMello

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 4
  • 1966 175 DT
Re: Seized throttle cable assy
« Reply #2 on: May 24, 2017, 07:48:20 PM »
Thanks guys, that is very helpful... now I wonder if Richard has some screws that I need?
Ride fast and live long!

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 655
Re: Seized throttle cable assy
« Reply #3 on: May 25, 2017, 05:16:34 PM »
              If you need 6 or 8mm screws, you can buy current ISO screws from anywhere and they will fit.            BS used JIS pitch screws for all other sizes so you will need to source from Richard or elsewhere. Standard ISO pitch screws do not fit.  Here's a link to the definitive guide to BS screw threads, see post by Disc Valve at the top :-

« Last Edit: May 25, 2017, 05:36:54 PM by BRT-GTR »
Unspoiled by progress.



Comments (0)
By: Geoff S

Comments (0)
By: AlanJohn

Comments (3)
By: mybridgestones

Comments (2)
By: OldSwartout


ISO / WTB: RH 350 head
Date: 02/13/2018 04:22 am
Time Left: 85d 9h 54m
Rear Carrier

Price: $0.00
Date: 01/23/2018 04:33 pm
Time Left: 34d 22h 5m
Solo seat

Price: $0.00
Date: 01/23/2018 04:29 pm
Time Left: 34d 22h 1m
**Updated** GTR/GTO Wiring Package.

Price: $0.00
Date: 01/10/2018 10:40 am
Time Left: 51d 16h 12m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal