Author Topic: Re-sealing a gas tank  (Read 833 times)

0 Members and 1 Guest are viewing this topic.

Offline Sora

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re-sealing a gas tank
« on: March 31, 2017, 06:06:26 PM »
The gas tank I have is rusty and I was wondering if there is a good way to restore it so I can use it again.

Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 134
Re: Re-sealing a gas tank
« Reply #1 on: April 01, 2017, 12:01:32 PM »
Yup !!!!most bike shops sell a thing called Kream 8)    it a kit to clean and seal gas tanks.... ive used it for over 20 years on tanks... just fol the in. and it will work out ok.....  but you have take the  gas tap off and fill that hole with something????? :o

Offline Sora

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re: Re-sealing a gas tank
« Reply #2 on: April 02, 2017, 09:50:41 PM »
Thanks

Offline jjwithers

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 92
    • Beemers and Bits
Re: Re-sealing a gas tank
« Reply #3 on: April 08, 2017, 02:12:08 AM »
I use POR 15.  good stuff.
Follow the directions.

This stuff is supposed to be great too:
http://www.caswellplating.com/epoxy-gas-tank-sealer.html#
1967 175 HS
and some BMW's from the 60's and 70's

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 258
  • CL-100
Re: Re-sealing a gas tank
« Reply #4 on: April 08, 2017, 06:46:53 AM »
I use Redkote, and it has always worked great.  Make sure it's ethanol resistant.  All of these sealers require you to follow the instructions exactly or you will risk it breaking down or peeling. 

Offline skiri251

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 45
Re: Re-sealing a gas tank
« Reply #5 on: April 08, 2017, 01:12:56 PM »
+1 on POR15

If the rust is not that bad and the tank is not leaking, YAMALUBE FUEL TANK RUST REMOVER & NEUTRALIZER KIT will work too.
This one does not put sealant layer so not subject to the peeling.

 


Gallery


Views:31
Comments (0)
By: Geoff S

Views:33
Comments (0)
By: AlanJohn

Views:48
Comments (3)
By: mybridgestones

Views:70
Comments (2)
By: OldSwartout

Classifieds

ISO / WTB: RH 350 head
Date: 02/13/2018 04:22 am
Time Left: 85d 9h 57m
Rear Carrier

Price: $0.00
Date: 01/23/2018 04:33 pm
Time Left: 34d 22h 8m
Solo seat

Price: $0.00
Date: 01/23/2018 04:29 pm
Time Left: 34d 22h 4m
**Updated** GTR/GTO Wiring Package.

Price: $0.00
Date: 01/10/2018 10:40 am
Time Left: 51d 16h 15m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal