Author Topic: Needed: Functional AC Dynamo, post 16G  (Read 973 times)

0 Members and 1 Guest are viewing this topic.

Offline TangoZulu

  • Current Roster:
  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 10
Needed: Functional AC Dynamo, post 16G
« on: January 19, 2018, 07:44:38 PM »
Anyone have one they are willing to part with, or know where I can find one? Nothing on eBay, though I do have and inquiry in to Richard. Opened mine up and it's junk. I only test rode the bike and lights on a fully charged battery before tearing it apart, so had no clue if the dynamo worked, but given the level of corrosion and parts and crap that fell out, I can't imagine it.
1970 Hurricane Scrambler
1971 Norton Commando 750 Roadster
2007 Moto Guzzi Breva 750
2009 Moto Guzzi Norge 1200

Online moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2070
Re: Needed: Functional AC Dynamo, post 16G
« Reply #1 on: January 19, 2018, 11:13:22 PM »
If you searched eBay with "Dynamo" nothing shows up, with "Generator" you get these......

https://www.ebay.com/sch/i.html?_sop=10&_from=R40&_nkw=bridgestone+175+generator&_sacat=6000&_fosrp=1

Of course, who knows if any of them are functional and since I'm a 350 guy, I wouldn't know if they're pre or post 16G.  Good luck.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 759
Re: Needed: Functional AC Dynamo, post 16G
« Reply #2 on: January 20, 2018, 09:23:51 AM »
          I stand to be corrected on this but I seem to remember reading in an old post the pre and post 16G alternators are interchangeable by swapping the drive gear and points cam and plate. Anyone confirm ?
         That raises another question, would a pre 16G (1/2 engine speed) alternator give a higher wattage output if converted to run at engine speed. Solution to lack of output on 350s ?
        Just a thought, Brian.
« Last Edit: January 20, 2018, 10:15:54 AM by BRT-GTR »
Unspoiled by progress.

Offline jjwithers

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 97
    • Beemers and Bits
Re: Needed: Functional AC Dynamo, post 16G
« Reply #3 on: January 28, 2018, 07:15:48 PM »
I just went through all this.... It isn't fun swapping out the generators.
The guy who helped me build my engine the first time (and it blew up) also built the generator and it didn't work. I didn't find out until I mounted it on the second engine rebuild and rode it around.  Then I had to tear it apart... again and rebuild it myself.
i was able to bench test mine that was a swap of many parts.  Don't let the nasty rotor or alternator windings fool you.  i had a super clean windings and it wasn't functioning.  I swapped it with a nasty rusty looking one and it worked perfectly. 
Bearings can be found for those as well.  Mine were really rusted and I cleaned them up pretty good but new bearings can be had cheap and swapped in.  I have new bearings now.

Here is a youtube of my bench test:


The first design of these generators was 1/2 engine speed.
2nd was full engine speed
3rd was full engine speed

Anyhow... I hope this helps but I can't weigh in on of the 1/2 speed can run at full speed with higher wattage....
1967 175 HS
and some BMW's from the 60's and 70's

Offline mybridgestones

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 34
Re: Needed: Functional AC Dynamo, post 16G
« Reply #4 on: March 01, 2018, 02:46:54 PM »
The early type generator is exactly the same as the later one.
I know this for sure because I bought a brand new early generator off Dusty Jordan many years ago for my HS 175.
I did exactly as he told me - which was:
Fit the later type gear, points cam, back plate and points.
It worked perfectly just as he said it would. After all, he was a Bridgestone dealer/specialist.

Offline mybridgestones

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 34
Re: Needed: Functional AC Dynamo, post 16G
« Reply #5 on: March 01, 2018, 03:01:57 PM »
Hi Tangozulu,

I actually have a nice condition generator.
It's been cleaned inside and out, with new bearings and seal fitted.
I've altered the wiring so it can run on external condensors which will save you loads of aggro if they ever go wrong.
While I had it apart, I replaced the cables coming out of the generator with new one's, soldered onto the existing.
Now... I've never had this running, but even if it didn't work, it would be a good basis to have refurbished.
You might be lucky and it could work fine. At worst, it will need rewinding.
Stu

 


Gallery


Views:4
Comments (0)
By: harleywaynecycles

Views:3
Comments (0)
By: harleywaynecycles

Views:3
Comments (0)
By: harleywaynecycles

Views:2
Comments (0)
By: harleywaynecycles

Classifieds

1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 84d 17h 43m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 76d 23h 54m
SOLD

Price: $0.00
Date: 09/04/2018 09:18 pm
Time Left: 73d 7h 48m
bridgestone tires
Date: 08/29/2018 05:24 pm
Time Left: 67d 3h 53m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal