Author Topic: Labyrinth oring  (Read 1695 times)

0 Members and 1 Guest are viewing this topic.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1108
Labyrinth oring
« on: April 30, 2017, 03:34:23 PM »
Gday all
Could someone tell me if my measurements are correct is the oring for the labyrinth seal 59x4 mm thanks

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 951
Re: Labyrinth oring
« Reply #1 on: May 04, 2017, 05:51:37 AM »
           Coxy,
                     As best I can measure on an assembled crank :-
   
                           Width of slot            4mm
                           OD of Lab seal        64mm
                           ID of oring slot          58.5mm

            So a 59x4 0ring should work.                                         Brian
Unspoiled by progress.
I'm so glad I grew up in the 60s & 70s. I did so much stupid stuff and there's no record of it.............Anywhere !!

Offline Bridgestone Man

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 159
Re: Labyrinth oring
« Reply #2 on: May 04, 2017, 10:21:02 AM »
For the cost of know correct one.  ::)I think its too much to risk since taking apart an engine is so much work, Order the correct one to make sure
Sam Keys

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1108
Re: Labyrinth oring
« Reply #3 on: May 05, 2017, 04:43:34 AM »
Thanks heaps for that the orings I've found are a match then cheers

Sam I've 3 motors apart already and shipping time from the states is a factor cheers

 


Gallery


Views:178
Comments (0)
By: Jon West

Views:1305
Comments (0)
By: rwgibbon

Views:1641
Comments (0)
By: Perry L Anderson

Views:1720
Comments (0)
By: Perry L Anderson

Classifieds

Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal