Author Topic: Pinion Gear  (Read 291 times)

0 Members and 1 Guest are viewing this topic.

Offline meevster

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 4
Pinion Gear
« on: February 15, 2017, 01:09:57 PM »
Ok, so this pinion gear is holding me back from completely taking the engine apart. I don't know if I am missing something, if it is just suck or if theres a special way of taking it off. I'd rather double check to make sure I'm not missing anything before I go prying at it, possibly breaking something that I didn't know about. I would like to be able to take off the rotary valve that's behind it so I can separate the crankcase.

So, any special way of taking it off or should I just start try to pry it out? I have taken the LEFT HANDED THREAD NUT off. In step 18, page 17 of the manual, it simply states to remove the retaining nut and gear from the shaft, nothing more than that so I'm assuming its just as easy as sliding it off. Again, this is a precaution on my part to just be sure I am doing it correctly. I have posted some pictures so you guys can see what I am working with. 

Offline skiri251

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 45
Re: Pinion Gear
« Reply #1 on: February 15, 2017, 01:24:38 PM »
No special way.
I used a three jaw gear puller but anything should do as long as you don't damage the rorary disk.


Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 407
Re: Pinion Gear
« Reply #2 on: February 15, 2017, 04:10:31 PM »
make sure you take that thin washer off - it can hinder removing the gear.

Dan
1966 175 DT and 1968 350 GTR

 


Gallery


Views:24
Comments (0)
By: aussum1

Views:22
Comments (0)
By: AlanJohn

Views:24
Comments (0)
By: AlanJohn

Views:34
Comments (0)
By: AlanJohn

Classifieds

Handle Bars with controls
Date: 08/17/2017 04:27 pm
Time Left: 87d 21h 58m
Bridgestone Homer Engine

Date: 08/14/2017 10:22 pm
Time Left: 85d 3h 53m
Parts Bike $40

Price: $0.00
Date: 08/09/2017 02:36 am
Time Left: 79d 8h 8m
Excellent Project bike: 1969 Dual Twin

Price: $330.00
Date: 08/01/2017 12:22 am
Time Left: 71d 5h 54m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 33
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 56
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 39
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 90
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM
Comments (0)

Powered by EzPortal