Author Topic: 1964 BS90 Ignition Key continued  (Read 2146 times)

0 Members and 1 Guest are viewing this topic.

Kickstand80

  • Guest
  • Trade Count: (0)
1964 BS90 Ignition Key continued
« on: March 03, 2016, 04:03:36 PM »
Sorry, I don't know how to post more photos to one post, it says a max of 3, so this is the continuation.

Photo 4, Here is what you will find inside. Match mark the triangle contact piece so it can be put back in the correct place. There is a spring under the contact, but the lock will not pop apart, there is not that much pressure it. The triangle contact has a tab on the bottom so you will not be able to reassemble it incorrectly. Clean the corrosion of the contact. Pull the contact and you will see a circular plastic piece that the spring sits in. That piece has a pass thru contact, it may fall apart when you pull it out. There are 4 pieces to it. Two small brass contacts, one sticks out the top and one out the bottom and in between is a spring and retainer. Not difficult to figure out if it falls out. I cleaned the bottom side of the top cover, where the wires are soldered to. I used a flat file to make everything smooth and shinny.

Photo 5, all the parts from inside. You can now see the 2 screws that hold the lock core in place.

Photo 6, is the lock core removed. You can mow take this to any locksmith and they should be able to find the correct key blank and cut you a new key. If you have never taken a lock core apart, now is not the time to try it. There are 4 VERY VERY small springs in the core that you will loose of you try to disassemble this.

Clean everything, a light coat of dielectric grease when you reassemble the switch can be put on the contact triangle and the bottom of the cover. Just a FYI the # that is on my lock is 949, which according to Key Man means nothing usefull. I have my lock at the locksmith and will post the manufacturer and key code when I get them back.

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1398
Re: 1964 BS90 Ignition Key continued
« Reply #1 on: March 03, 2016, 04:13:11 PM »
Hey Kickstand80. You can just reply to your own post and that eliminates the need to start a new thread. This looks like a pretty ambitious project, hope it works out well. Welcome to the fun!
...bert

Offline Old BS Guy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 141
Re: 1964 BS90 Ignition Key continued
« Reply #2 on: March 04, 2016, 01:02:31 AM »
Welcome to the BS community, Kickstand80; Just a heads up; Those key codes are more common than you think. I just bought two from a vendor on Ebay for 2 of my BS bikes, #'s 513 & 911, and they fit, and work perfectly. They typically range anywhere from 10-20$. The Ebay vendor I used, (your trash-my treasures), has your key #949 listed in his inventory in the same ad I purchased from. He's in Texas. Great to work with.
 The 4 springs you refer to are for the timbler pins, and all of that is very delicate and important to the lock function. Interestingly, I just purchased a '66 90 Sport, and it had no keys. It had been stored in a garage for decades. I found 2 keys on an original dealer inventory keytag inside the headlamp bucket. Apparently put there as a spare, or when stored for antitheft purposes. Best of luck on all your future Bridgestone adventures, and Welcome!
'65 BS Homer 50, '69 Mk II RS, '67 GTR, '70 GTO, '75 Taka 100, '69 Mk II SS.

 


Gallery


Views:220
Comments (0)
By: Jon West

Views:1362
Comments (0)
By: rwgibbon

Views:1690
Comments (0)
By: Perry L Anderson

Views:1757
Comments (0)
By: Perry L Anderson

Classifieds

Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal