Author Topic: Labyrinth oring  (Read 1148 times)

0 Members and 1 Guest are viewing this topic.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1105
Labyrinth oring
« on: April 30, 2017, 03:34:23 PM »
Gday all
Could someone tell me if my measurements are correct is the oring for the labyrinth seal 59x4 mm thanks

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 783
Re: Labyrinth oring
« Reply #1 on: May 04, 2017, 05:51:37 AM »
           Coxy,
                     As best I can measure on an assembled crank :-
   
                           Width of slot            4mm
                           OD of Lab seal        64mm
                           ID of oring slot          58.5mm

            So a 59x4 0ring should work.                                         Brian
Unspoiled by progress.

Offline Bridgestone Man

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 131
Re: Labyrinth oring
« Reply #2 on: May 04, 2017, 10:21:02 AM »
For the cost of know correct one.  ::)I think its too much to risk since taking apart an engine is so much work, Order the correct one to make sure
Sam Keys

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1105
Re: Labyrinth oring
« Reply #3 on: May 05, 2017, 04:43:34 AM »
Thanks heaps for that the orings I've found are a match then cheers

Sam I've 3 motors apart already and shipping time from the states is a factor cheers

 


Gallery


Views:21
Comments (0)
By: harleywaynecycles

Views:20
Comments (0)
By: harleywaynecycles

Views:17
Comments (0)
By: harleywaynecycles

Views:9
Comments (0)
By: harleywaynecycles

Classifieds

BS Keychain (SOLD)

Price: $0.00
Date: 11/23/2018 12:51 pm
Time Left: 73d 9h 4m
350 engine carb covers left an right show quality SOLD!!!
Price: $0.00
Date: 11/18/2018 06:13 pm
Time Left: 68d 14h 27m
Frame etc Bridgestone 350

Price: $0.00
Date: 11/15/2018 11:52 pm
Time Left: 475d 20h 6m
[ebay] ‘67 175 DT - no reserve
Price: $0.00
Date: 11/09/2018 10:20 am
Time Left: 59d 6h 34m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal