Author Topic: 175 Crank seal  (Read 1337 times)

0 Members and 1 Guest are viewing this topic.

Dave K

  • Guest
  • Trade Count: (0)
175 Crank seal
« on: October 31, 2009, 11:33:21 AM »
My brother is working on his 175, it had been sitting inside for about 20yrs. It is running now, but not real well. When you cover one carb. with your hand, both cylinders will continue to run instead of flooding the one cylinder that is choked off. We suspect the center crank seal is bad. Is there another easy test for this? Also, if the seal is bad, is the seal available. We know the crank has to be pressed apart.



Comments (1)
By: fahrkle

Comments (1)
By: Geoff S

Comments (0)
By: AlanJohn

Comments (3)
By: mybridgestones


Misc 1968 Bridgestone 90 parts wanted
Date: 04/16/2018 03:09 pm
Time Left: 84d 18h 11m
Neutral switch for 350
Date: 04/15/2018 03:14 pm
Time Left: 83d 18h 16m
GTO diffuser seals
Date: 04/08/2018 04:27 am
Time Left: 76d 7h 29m
GTO stingers diffusers
Date: 04/02/2018 06:29 am
Time Left: 70d 9h 31m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal