Author Topic: carb removal help  (Read 296 times)

0 Members and 1 Guest are viewing this topic.

Offline Hap

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 110
  • 68 GTR 350 & 66 Sport 90
carb removal help
« on: April 20, 2017, 08:39:11 AM »
Could anyone provide me with instructions on how to easily remove the carbs from the GTR 350? I have gas pouring out of each side now after sitting for the winter. Also, would anyone be interested in buying my 350? I have moved on to other interest and am willing to part ways with the bike. It's a 1968 and in very good condition other than the carbs leaking and the battery cover scratched from falling off last summer. It also has clean NH title.
68 GTR 350
66 Sport 90

Offline old smokey

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 665
Re: carb removal help
« Reply #1 on: April 23, 2017, 11:07:26 AM »
My thought would be that you can cure the leak by just sliding the carbs off the intake tubes and tilting them enough to remove the bottom float bowl.
First guess is that the needle valves got just enough gasoline "varnish" to stick in the open (down) position and not move up to close flow when the bowls are up.
Second guess is that both brass floats have developed a crack in the solder seam and don't float anymore. Not likely, but not impossible.
You don't need to disconnect cables from the carb for troubleshooting either of those guesses.
'67 350 GTR undergoing repairs with a '75 Yamaha TX500 front end

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 544
Re: carb removal help
« Reply #2 on: April 25, 2017, 06:01:46 AM »
              Sometimes a gentle tap or two on the carb with a block of wood is enough to free up those sticky floats or needle valves after standing over winter.
Growing old is compulsory, Growing up is optional.

Offline Hap

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 110
  • 68 GTR 350 & 66 Sport 90
Re: carb removal help
« Reply #3 on: April 28, 2017, 07:28:50 AM »
I must be doing something wrong because I cant move them out to get at the back screws of the float bowl.
68 GTR 350
66 Sport 90

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 925
Re: carb removal help
« Reply #4 on: April 28, 2017, 11:50:00 AM »
Did you loosen the spigot clamp screw on the inside? You remove the rubber plug in the front of the carb enclosure and reach in with a flat-bladed screwdriver. Then pull and twist to get the carb to slide off the spigot. On the right side, you may also need to remove or pull the oil pump control cable up and out of the way to get the carb off.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 130
Re: Well Dam !!!!
« Reply #5 on: April 29, 2017, 03:04:20 PM »
Well after all most 50 years the little piece on the side stand went away... :o     I guess its time to get out the welder and fire it up... 8)

 


Gallery


Views:24
Comments (0)
By: AlanJohn

Views:25
Comments (0)
By: AlanJohn

Views:19
Comments (0)
By: AlanJohn

Views:18
Comments (0)
By: AlanJohn

Classifieds

Two BS 100 Fuel Tanks

Price: $0.00
Date: 05/25/2017 06:13 pm
Time Left: 89d 23h 3m
BS 90 for Parts

Price: $0.00
Date: 05/25/2017 06:07 pm
Time Left: 89d 22h 57m
350 GTO for Parts

Price: $0.00
Date: 05/25/2017 09:43 am
Time Left: 89d 14h 33m
175/200 EXPANSION CHAMBERS

Price: $300.00
Date: 05/17/2017 10:12 am
Time Left: 81d 15h 2m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 23
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 48
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 36
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 78
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal