Author Topic: Replacement rectifier/regulator wiring  (Read 231 times)

0 Members and 1 Guest are viewing this topic.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 559
Replacement rectifier/regulator wiring
« on: April 04, 2017, 02:38:21 PM »
   Hi all.
             Been looking for a low cost modern rectifier for some time but in one of those 'senior moments' I got carried away and ordered this :-

                http://www.ebay.co.uk/itm/191744045045?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

  It's bit bigger than I was expecting (4.25''  x 3.25'')with a massive double sided heat sink but should go under the seat or tank.   The one that came has slightly different wire colours to that advertised and looks very similar to the one below. Ok the 3 yellow wires connect to the alternator and the red and green wires go to the battery.  Can any of you elecrical experts tell me the best place to connect (or not connect) the sensing wire, which is black and smaller gauge than the others.  Seems similar to those fitted on some early Kawasaki and Yamaha models. It has 'YM1610' lightly marked on the case.
    Brian 
            PS. How do you insert photos in the text ?

           
« Last Edit: April 04, 2017, 02:48:33 PM by BRT-GTR »
Growing old is compulsory, Growing up is optional.

Online OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 931
Re: Replacement rectifier/regulator wiring
« Reply #1 on: April 04, 2017, 04:42:30 PM »
Very nice and inexpensive.  I installed a similar regulator/rectifier from an early Kawasaki four.  One thing I just learned is that the regulator voltage sensing wire needs to hook up near the battery. I initially hooked it up to the switched power to the coils/lights (blue on the 350). The problem is that due to the small diameter wiring used on Bridgestones, there is .5 - 1.0 volt drop in the wiring, throwing off the voltage regulation.  I had a couple of oxidized connectors that added another .5 volt drop.  On the Kawasaki regulator, the voltage sensing wire did not need to be switched as there was no current draw to kill the battery during storage, so I hooked it directly to the battery positive lead.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 559
Re: Replacement rectifier/regulator wiring
« Reply #2 on: April 07, 2017, 04:30:38 AM »
             Many thanks Karl. Exactly what I needed to know. I wasn't fully sure of the role of the sensing wire but now understand and where to fit the connection. Will carry out a current draw check test when switched off.
             Brian.
Growing old is compulsory, Growing up is optional.

 


Gallery


Views:14
Comments (0)
By: busagsx1300

Views:11
Comments (0)
By: busagsx1300

Views:38
Comments (0)
By: AlanJohn

Views:39
Comments (0)
By: AlanJohn

Classifieds

Rockford 2 Cycle Oil

Price: $0.00
Date: 06/14/2017 04:29 pm
Time Left: 80d 7h 28m
Bridgestone Jacket

Price: $0.00
Date: 06/13/2017 04:55 pm
Time Left: 79d 7h 53m
BS 100 Engine

Price: $0.00
Date: 05/29/2017 10:22 pm
Time Left: 64d 13h 20m
BS 175 for Parts

Price: $0.00
Date: 05/26/2017 10:08 pm
Time Left: 61d 13h 6m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 25
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 50
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 37
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 79
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal