Bridgestone Motorcycle Parts Discussion Board

Bridgestone Tech Talk => 350 Talk => Topic started by: redimport on December 13, 2008, 08:01:52 AM

Title: 350 Grab Rail
Post by: redimport on December 13, 2008, 08:01:52 AM

Mornin All,

Has anyone a grab rail for the 350's. One that is broken (but can be repaired) / rusted / what ever - that you can send us. We are looking at getting them reproduced in a job lot of 100.

We have just finished reproducing the engine cushion mounts.

http://www.redimport.net/bridgestone/parts/350_GTO-GTR%20_Engine_Cushion_Rubbers.htm

Thanks .. ray

Title: Re: 350 Grab Rail
Post by: czmike on December 14, 2008, 05:23:38 PM

Hi Ray,

I have one you may borrow that is undamaged and sitting in my rust removal bath at the moment.
I won't need it for quite a while. Gotta keep you making those fabulous reproduction parts!

If you confirm that you have no other grab rail on the way I will post it to you quickly.
Please provide the mail address.


Best Regards,

Mike

Title: Re: 350 Grab Rail
Post by: redimport on December 15, 2008, 09:10:50 AM

Hi Mike,

Thanks for the offer and have sent you a mail with an address to send to.

later . ray

Title: Re: 350 Grab Rail
Post by: redimport on December 16, 2008, 01:45:44 AM

Hi Mike,

Sorry, wrong grab rail - really looking for the pillion grab rail - so the hunt is back on !

Thanks .. ray

Title: Re: 350 Grab Rail
Post by: CafeTBird on December 16, 2008, 08:56:39 AM

Do you mean the small grab rail that mounts to the left side of the bike, or the one that wraps around the back of the seat?

Title: Re: 350 Grab Rail
Post by: fiction on February 01, 2009, 01:05:16 PM

i see joesattic has one of these on ebay .