Author Topic: MK II SS Clutch Stopper Tool  (Read 2632 times)

0 Members and 1 Guest are viewing this topic.

sk8erx

  • Guest
  • Trade Count: (0)
MK II SS Clutch Stopper Tool
« on: November 01, 2009, 10:49:13 AM »
Any know where I can get a clutch stopper tool? Or a suitable replacement tool? Thanx!

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 1314
Re: MK II SS Clutch Stopper Tool
« Reply #1 on: November 02, 2009, 08:22:00 AM »
Try Richard or CPC - P/N 9379-8010.  If not there, try this:
http://www.sears.com/shc/s/p_10153_12605_00999237000P?keyword=pin+wrench
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=36554

So much for the "proper" tool route - you can also try a couple of work-arounds:

1. Use an air impact.  You may not need to hold the clutch hub at all.

2. Put the transmission in gear, preferably one of the higher gears.  Hold the transmission output by putting vice grips or a pipe wrench on the sprocket.  Be careful to not damage the sprocket teeth. 

Also, do not try holding the clutch hub by using the spring guide pins on the pressure plate.  That's a good way to end up needing a new pressure plate (although I've gotten away with it at least once).
Karl Swartout
Mooresville, IN
BS175 Roadracer. BS200RS, BS350 GTR

sk8erx

  • Guest
  • Trade Count: (0)
Re: MK II SS Clutch Stopper Tool
« Reply #2 on: November 02, 2009, 12:04:46 PM »
Wow, you rock! Thank you! I am making a trip to Harbor Freight any way and the Adjustable Pin Wrench looks like it will do the trick!

paul25g

  • Guest
  • Trade Count: (0)
Re: MK II SS Clutch Stopper Tool
« Reply #3 on: December 08, 2009, 10:34:36 AM »
I'm getting ready to do this also, but I don't think the Harbor Freight wrench opens up wide enough.  I found the attached photo on the internet, think I'll give it a try!

 


Gallery


Views:221
Comments (0)
By: Jon West

Views:1363
Comments (0)
By: rwgibbon

Views:1692
Comments (0)
By: Perry L Anderson

Views:1757
Comments (0)
By: Perry L Anderson

Classifieds

Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal