Author Topic: Carb needles  (Read 994 times)

0 Members and 1 Guest are viewing this topic.

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Carb needles
« on: December 28, 2017, 02:25:16 PM »
Gday guys
I've about seven pretty trashed carbs nearly all have damage to the float pin mounts and I'm just trying to get two operational
Question is
Is the shorter thicker needles for the later design carbs
Thanks

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2079
Re: Carb needles
« Reply #1 on: December 28, 2017, 03:31:28 PM »
Early on the left & later on the right.....  ;D
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Re: Carb needles
« Reply #2 on: December 29, 2017, 03:24:11 AM »
Thanks heaps Mike
Just what I needed looks like I will have to find some new later model ones
Cheers

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2079
Re: Carb needles
« Reply #3 on: December 29, 2017, 02:36:54 PM »
Thanks heaps Mike
Just what I needed looks like I will have to find some new later model ones
Cheers

You're lucky, cuz those are the easier ones to find.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Re: Carb needles
« Reply #4 on: December 29, 2017, 02:49:40 PM »
Yes it seems that way
All the other early ones have been repaired at some point with the float pin repair kits
The brass bushes have all worn out the mounts and fallen out
The only way to fix them would be to fill and drill
I will try to post a pic
Cheers

Offline hardy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 162
Re: Carb needles
« Reply #5 on: January 22, 2018, 06:52:08 PM »
I drilled and tapped my early carbs to accept the later needle valves.

I still have the tap and am happy to post it to you to borrow?

Offline coxy

  • coxy
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1104
Re: Carb needles
« Reply #6 on: January 24, 2018, 12:51:01 AM »
thanks hardy I will keep that in mind
it will be quite some time before I get to the old carbs cheers

 


Gallery


Views:10
Comments (0)
By: harleywaynecycles

Views:15
Comments (0)
By: harleywaynecycles

Views:10
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 85d 9h 20m
Bridgestone 350 Carburetors (2nd. Set)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 73d 15h 4m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 55d 5h 25m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 47d 11h 36m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal