Author Topic: Re-sealing a gas tank  (Read 1374 times)

0 Members and 1 Guest are viewing this topic.

Offline Sora

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re-sealing a gas tank
« on: March 31, 2017, 06:06:26 PM »
The gas tank I have is rusty and I was wondering if there is a good way to restore it so I can use it again.

Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 139
Re: Re-sealing a gas tank
« Reply #1 on: April 01, 2017, 12:01:32 PM »
Yup !!!!most bike shops sell a thing called Kream 8)    it a kit to clean and seal gas tanks.... ive used it for over 20 years on tanks... just fol the in. and it will work out ok.....  but you have take the  gas tap off and fill that hole with something????? :o

Offline Sora

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re: Re-sealing a gas tank
« Reply #2 on: April 02, 2017, 09:50:41 PM »
Thanks

Offline jjwithers

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 97
    • Beemers and Bits
Re: Re-sealing a gas tank
« Reply #3 on: April 08, 2017, 02:12:08 AM »
I use POR 15.  good stuff.
Follow the directions.

This stuff is supposed to be great too:
http://www.caswellplating.com/epoxy-gas-tank-sealer.html#
1967 175 HS
and some BMW's from the 60's and 70's

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 275
  • CL-100
Re: Re-sealing a gas tank
« Reply #4 on: April 08, 2017, 06:46:53 AM »
I use Redkote, and it has always worked great.  Make sure it's ethanol resistant.  All of these sealers require you to follow the instructions exactly or you will risk it breaking down or peeling. 

Offline skiri251

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 45
Re: Re-sealing a gas tank
« Reply #5 on: April 08, 2017, 01:12:56 PM »
+1 on POR15

If the rust is not that bad and the tank is not leaking, YAMALUBE FUEL TANK RUST REMOVER & NEUTRALIZER KIT will work too.
This one does not put sealant layer so not subject to the peeling.

 


Gallery


Views:10
Comments (0)
By: harleywaynecycles

Views:16
Comments (0)
By: harleywaynecycles

Views:10
Comments (0)
By: harleywaynecycles

Views:5
Comments (0)
By: harleywaynecycles

Classifieds

Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 82d 13h 20m
Bridgestone 350 Carburetors (2nd. Set)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 70d 19h 3m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 52d 9h 24m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 44d 15h 35m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal