Author Topic: 350 Crank Pin Size?  (Read 408 times)

0 Members and 1 Guest are viewing this topic.

Online moonpup

  • Laidback Purist
  • FullMember
  • Trade Count: (0)
  • *
  • Posts: 1846
350 Crank Pin Size?
« on: March 21, 2017, 06:27:33 PM »
Would anyone happen to have measurements for the 350 crank pins?  Length & diameter?
Confucius say... "Better to have Bridgestone than Kidneystone"

Online moonpup

  • Laidback Purist
  • FullMember
  • Trade Count: (0)
  • *
  • Posts: 1846
Re: 350 Crank Pin Size?
« Reply #1 on: March 22, 2017, 04:29:59 PM »
Update: I been informed that they are 24mm x 52.6mm.  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline bert Lilley

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 20
Re: 350 Crank Pin Size?
« Reply #2 on: March 23, 2017, 09:54:45 AM »

  Just Happen to have one on my Desk  :- Pin Diameter = 0.945" in Dia x 25.4 = 24mm dia. 
                                                       
                                                                  Pin Length = 2.072" x 25.4 = 52.6mm Long.

Hope this Helps  Bert

Online moonpup

  • Laidback Purist
  • FullMember
  • Trade Count: (0)
  • *
  • Posts: 1846
Re: 350 Crank Pin Size?
« Reply #3 on: March 23, 2017, 06:55:13 PM »
Thank you for the confirmation Bert..... and yes, it does help.
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline farmerdl

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 110
Re: 350 Crank Pin Size?
« Reply #4 on: March 25, 2017, 08:24:09 AM »
What information is available regarding the heat treat on these pins? 

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 926
Re: 350 Crank Pin Size?
« Reply #5 on: March 25, 2017, 11:20:42 AM »
Crank pins are typical bearing journal specs, RC60-62 hardness. They can be relatively soft core, RC30-45 with either a nitrided case that will be .007-.015 deep or carburized which should provide from .020-.050 case depth. With the nitride heat treat, there's not much depth for finish grind after plus the thin case needs a harder core for support.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline bsracer

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 275
Re: 350 Crank Pin Size?
« Reply #6 on: March 26, 2017, 02:05:50 AM »
I just cut down some 175 pins to use for the crank jig and they were not soft in the center! Amazing how tough those things can be!

paul

 


Gallery


Views:27
Comments (0)
By: AlanJohn

Views:26
Comments (0)
By: AlanJohn

Views:21
Comments (0)
By: AlanJohn

Views:22
Comments (0)
By: AlanJohn

Classifieds

BS 175 for Parts

Price: $0.00
Date: 05/26/2017 10:08 pm
Time Left: 88d 6h 25m
Two BS 100 Fuel Tanks

Price: $0.00
Date: 05/25/2017 06:13 pm
Time Left: 87d 2h 30m
BS 90 for Parts

Price: $0.00
Date: 05/25/2017 06:07 pm
Time Left: 87d 2h 24m
350 GTO for Parts

Price: $0.00
Date: 05/25/2017 09:43 am
Time Left: 86d 18h 1m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Downloads: 23
Filesize: 7154.56KB
Date: April 18, 2017, 07:25:38 AM
Comments (0)
Bridgestone 100 Sport Brochure
Rating: *****
Downloads: 48
Filesize: 937.72KB
Date: July 08, 2015, 11:58:53 AM
Comments (1)
BS 100 Sport Australian Brochure
Rating: *****
Downloads: 37
Filesize: 937.53KB
Date: June 29, 2015, 05:40:40 PM
Comments (0)
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Downloads: 78
Filesize: 9429.41KB
Date: April 22, 2015, 03:18:43 PM
Comments (0)

Powered by EzPortal