Author Topic: BS - FTR 175  (Read 579 times)

0 Members and 1 Guest are viewing this topic.

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
BS - FTR 175
« on: August 28, 2017, 04:09:31 AM »
Hi All,

Three years after downsizing and getting back on top of life. I have found time to look around and see what is left. This DT 175 was dragged along and left out the back of the workshop. I also had a crashed Honda FTR 250, minus engine that a friend left with me. Tank & seat section in good condition.

After a brain fart, why not a BS FTR 175 ?... Ceriani forks sitting with Richard Clark for years finally made it back to me. Have a set of SR carb covers, carbs, valve covers and a few other bits to rebuild the engine. Lets make noise !!

Will need to build a set of expansion chambers and plan to have them both come out on the right side.

Aiming to spend the least amount possible and use all the stuff in boxes to make the build.

later ... ray




Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: BS - FTR 175
« Reply #1 on: August 28, 2017, 04:12:01 AM »
Oops ... forgot some photo's

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: BS - FTR 175
« Reply #2 on: August 29, 2017, 05:01:27 AM »
Lady luck was on the side of this DT. Has been out in all weather and yet the cylinders just slid off the pistons !!.... Both pistons were blocking the exhaust ports and am assuming the rotary valves are also blocking off the crank. As no water or corrosion in the crankcases.

 banana

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1354
Re: BS - FTR 175
« Reply #3 on: August 29, 2017, 11:39:29 AM »
Nice project Ray! Rock and Roll!
...bert

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: BS - FTR 175
« Reply #4 on: October 03, 2017, 07:48:48 AM »
A little progress made. Wheels rebuilt so as to get a rolling chassis. Need to do a full dry build to make sure I have everything cut off that is not needed and new bits welded on to frame that are needed ?... before stripping it and getting frame & tank painted. Looking at KTM orange.

Picked up a set of pipes that will need some cutting & welding to make fit. They will do for now till I find the time & energy to custom make a set coming out on right side.

later .. ray 

Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: BS - FTR 175
« Reply #5 on: October 05, 2017, 03:50:43 AM »
After opening up the silencers, decided to cut the end cans off and expose the expansion chamber ends. Need to graft on standard header pipes. Makes it possible to have both pipes out on the right side. Some creative bracketing needed yet, doable.


Offline SR-175

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: BS - FTR 175
« Reply #6 on: November 11, 2017, 08:10:49 AM »
Motor is next.

Offline old smokey

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 683
Re: BS - FTR 175
« Reply #7 on: December 14, 2017, 11:16:57 AM »
Nice!
Edited, obviously wrong selection of icons
« Last Edit: December 19, 2017, 08:36:48 PM by old smokey »
'67 350 GTR undergoing repairs with a '75 Yamaha TX500 front end

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 390
  • 1968 BS 350 GTR
Re: BS - FTR 175
« Reply #8 on: December 15, 2017, 02:50:47 PM »
It looks like you are doing a great job!

Keep the pictures coming.

Thank you.

Randy


 


Gallery


Views:10
Comments (0)
By: Geoff S

Views:21
Comments (0)
By: AlanJohn

Views:36
Comments (3)
By: mybridgestones

Views:59
Comments (2)
By: OldSwartout

Classifieds

Custom Made GTR/GTO Main Wiring Harnesses.

Price: $0.00
Date: 01/10/2018 10:40 am
Time Left: 81d 16h 24m
In Need of Center Crankshaft Bearing for 350 GTR

Date: 01/07/2018 04:30 pm
Time Left: 78d 22h 14m
Air Filter Joint Rubber

Price: $0.00
Date: 01/04/2018 03:57 pm
Time Left: 45d 21h 41m
Bridgestone Motorcycle t Shirts for sale

Price: $32.00
Date: 12/24/2017 03:50 pm
Time Left: 64d 21h 34m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal