Author Topic: GTR cylinder paint?  (Read 276 times)

0 Members and 1 Guest are viewing this topic.

Offline nysz1b

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 81
  • What, me worry?
GTR cylinder paint?
« on: August 17, 2017, 03:51:21 PM »
Just wondering if the GTR cylinders are painted or left in a natural state? If so, what's a good match? Thanks in advance!

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 947
Re: GTR cylinder paint?
« Reply #1 on: August 17, 2017, 05:21:00 PM »
The cylinders, heads and crankcase were natural, the carburetor covers, air cleaner housing and the outer fin on each head were polished, but still unpainted. The right side clutch/carburetor housing and left side carburetor & sprocket housings were painted with a silver metallic paint.  Someone else may know of an exact match, but I've always used a Dupli-Color GM silver for 80's vans that seems to be a close match.

Someone else may have more exact info, including how to keep the natural aluminum cylinders and heads looking good over time.  If you bead blast them to get a new clean look, the surface will eventually deteriorate and lose the "new" look.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline nysz1b

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 81
  • What, me worry?
Re: GTR cylinder paint?
« Reply #2 on: August 21, 2017, 12:27:03 PM »
Thanks for the info, OldSwartout. It appears that my cylinders were painted silver or gray. I may do a hi-temp silver/aluminum paint to keep the bare metal from oxidizing. Also wondering if vapor blasting is a good alternative to painting the cylinders? Has anyone else out there painted their cylinders?

Offline hardy

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 140
Re: GTR cylinder paint?
« Reply #3 on: August 21, 2017, 05:04:16 PM »
On my RD400, I painted my cylinders with a high temp engine paint. It is just showing signs of starting to flake at the fin ends after 5 years, I preped the cylinders by sand blasting first.

If you were to vapour/bead/soda blast the barrels, the results are good but over time I guess the dirt would inpregnate the Ali and cause blemishes. My experiences are limited, but the carbs I did for my RD400 still look nice.

I Too am Interested in Keeping blasted components clean...Perhaps someone with more experience can chime in?
« Last Edit: August 21, 2017, 05:06:22 PM by hardy »

Offline Tom Meadows

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 25
Bead blasted parts sealing
« Reply #4 on: August 22, 2017, 04:54:35 PM »
My favorite technique for sealing bead blasted parts was shown to me in the late seventies. The problem is that once the bead blasting opens up the pores  in the aluminum  it will collect fingerprints, dust and anything else near it. Liberally hosing it with WD 40 immediately after blasting seals the pores with what is a clear oil that can be mostly wiped off and also leaves a thin barrier against dirt and grease. This has served me well for many years,and it only darkens the color of the aluminum very slightly initially, but very evenly as well.

I suspect there may be modern clear powder coats  that are worth looking into.


Tom 

Offline nysz1b

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 81
  • What, me worry?
Re: GTR cylinder paint?
« Reply #5 on: August 24, 2017, 03:23:07 PM »
Thanks everyone for the info!

Ken

 


Gallery


Views:12
Comments (0)
By: AlanJohn

Views:11
Comments (0)
By: AlanJohn

Views:13
Comments (0)
By: AlanJohn

Views:13
Comments (0)
By: AlanJohn

Classifieds

350 GTR/GTO Dynamo Points Base Plate & Case Screws

Price: $0.00
Date: 09/14/2017 01:44 pm
Time Left: 79d 7h 57m
SUPER RARE 1965 BRIDGESTONE HUMP BACK SPORT 90.

Price: $1400.00
Date: 09/03/2017 02:02 pm
Time Left: 68d 8h 15m
Searching For Parts To Complete A 350 GTR

Date: 09/02/2017 05:19 pm
Time Left: 67d 11h 32m
Handle Bars with controls
Date: 08/17/2017 04:27 pm
Time Left: 51d 10h 39m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal