Author Topic: Crank Bearings GP 100 Trail  (Read 1761 times)

0 Members and 1 Guest are viewing this topic.

Offline greg145

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Crank Bearings GP 100 Trail
« on: December 18, 2013, 11:39:07 PM »
How do I know if my crank bearings need replaced?  Is there anything I can do to check them?  The bike has about 5,000 miles on it.  I have the jug and the piston out already.  Do I just change them while I'm at it, or is it not necessary?  Free advice please!!!!! :) :) :)

Offline william anderson

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 60
Re: Crank Bearings GP 100 Trail
« Reply #1 on: December 19, 2013, 12:50:54 AM »
hi  , when you say crank bearings do you mean lower end rod bearings or the crankshaft main support bearings  , if you are talking about rod  bearings , you check for any excess motion in side to side on big end of rod ,  this checks thrust washer wear , you can take the wrist pin an bearing an place in small end of rod and  twist the wrist pin checking for any twisting motion in the rod , should have none to very slight ,last take an hold crank steady an an take small end of rod an pull up an push down to check for any loose movement , should have none for good tight crankshaft , if crankshaft support bearings , rotate crankshaft an feel for smoth free movement , no drag or rough feel in rotation , you can also take hold of the flywheel with both hands an try to lift the flywheel up an down checking for any loose motion or play in bearings , if no play or loose motion , bearings are ok  , william anderson
william anderson

 


Gallery


Views:9
Comments (1)
By: killerterp

Views:27
Comments (0)
By: rwgibbon

Views:50
Comments (1)
By: fahrkle

Views:80
Comments (1)
By: Geoff S

Classifieds

Wanted BS 100 Sport Fuel Tank and Muffler
Date: 06/14/2018 03:46 pm
Time Left: 85d 18h 44m
Need 350 clutch hub

Date: 06/11/2018 10:09 am
Time Left: 82d 13h 8m
Bridgestone Sign

Price: $0.00
Date: 06/10/2018 02:10 pm
Time Left: 81d 17h 9m
1970 mach2 project bike

Price: $500.00
Date: 06/08/2018 06:50 pm
Time Left: 79d 21h 49m

Recent Downloads added

Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM
Bridgestone Magazine Article

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:38:08 PM
How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bert Lilley's BS 350 Racer Modifications
Rating: (None)
Filesize: 0KB
Date: January 09, 2017, 04:27:24 PM

Powered by EzPortal