Author Topic: 350 Running rich ? - Check your choke plungers.  (Read 700 times)

0 Members and 1 Guest are viewing this topic.

Offline BRT-GTR

  • Brian
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 759
350 Running rich ? - Check your choke plungers.
« on: September 22, 2017, 12:01:51 PM »
             My GTO was coughing, spluttering and snatching on light load, was almost unrideable. Despite having correct float levels, 25 pilots, 130 mains and needle clips second from top she still seemed to be running rich.  I was sure the choke plungers were seating but they were the only source of overfueling left.
           Pulled them out, prised out the tip rubbers (rock hard but NOS carbs) with a sharp point and needlenose pliers. Original rubber disc diameter was probably 7mm but only had a quarter inch punch. So stamped a couple of 2mm thick viton rubber (Ebay) discs. Put these in at an angle and used a small blunt screwdiver to press the sides in and down into the recess, working round the tip.  Refitted to carbs and made sure there was a bit of slack in the choke cable at the lever end.
         What a difference, she now runs smoothly at low revs and is pleasant to ride. So that's another issue cured, still vibrating at higher revs but will sort that in due course.

           Brian.
« Last Edit: September 23, 2017, 06:21:58 AM by BRT-GTR »
Unspoiled by progress.

Offline moonpup

  • Laidback Purist
  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 2070
Re: 350 Running rich ? - Check your choke plungers.
« Reply #1 on: September 22, 2017, 01:29:27 PM »
Great tip Brian, thanks for taking the time to post it!  8)
Confucius say... "Better to have Bridgestone than Kidneystone"

Offline CL-100

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 275
  • CL-100
Re: 350 Running rich ? - Check your choke plungers.
« Reply #2 on: September 22, 2017, 04:04:19 PM »
Brian,

I've followed the thread on this subject on Yahoo Bridgestone and thought it was so useful that I printed it out and filed it with other jewels of information like this.  I'm in the process of gathering parts for a BS50 restoration as well as a 350 resto-mod I'm going to do in cafe racer style.  I do have a NOS set of carbs for the 350 project but I'm probably going to check the plungers on them.

I can't tell you how many times I've heard of carb problems with 350's that were only fixed by changing to different carbs.  There could be a whole lot of used carbs still in use with this fix!

Thanks for passing the good info on.

Rowland

Offline rwgibbon

  • Trade Count: (2)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 407
  • 1968 BS 350 GTR
Re: 350 Running rich ? - Check your choke plungers.
« Reply #3 on: September 22, 2017, 06:24:54 PM »
Good to know.

Thank you.

Randy

 


Gallery


Views:4
Comments (0)
By: harleywaynecycles

Views:3
Comments (0)
By: harleywaynecycles

Views:3
Comments (0)
By: harleywaynecycles

Views:2
Comments (0)
By: harleywaynecycles

Classifieds

1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 85d 0h 32m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 77d 6h 43m
SOLD

Price: $0.00
Date: 09/04/2018 09:18 pm
Time Left: 73d 14h 37m
bridgestone tires
Date: 08/29/2018 05:24 pm
Time Left: 67d 10h 42m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal