Author Topic: Paint advice  (Read 1191 times)

0 Members and 1 Guest are viewing this topic.

Offline Gizo

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 14
Paint advice
« on: February 14, 2015, 11:51:49 PM »
I am painting my 175dt, 
I took the tank side cove and oil tank back to bare metal,  primed, etc.
I have just sprayed colour,
6 coats of colour, 5 coats of clear all acrylic ( I know 2k is better,  but first attempt at painting, and was advised to do acrylic).
Anyway I got the colour nice and even, the clear coat had a bit of orange peel, I sanded the clear coat,  when I noticed pin holes in the clear,  ?    Any ideas what they might be from?  Do I sand them out or keep buffing till they are gone?  I could not see them when I sanded they only showed after buffing. Photo do not show it,  the White spots are just polish
Any advice appreciated

 


Gallery


Views:14
Comments (0)
By: harleywaynecycles

Views:16
Comments (0)
By: harleywaynecycles

Views:11
Comments (0)
By: harleywaynecycles

Views:6
Comments (0)
By: harleywaynecycles

Classifieds

[ebay] ‘67 175 DT - no reserve
Price: $0.00
Date: 11/09/2018 10:20 am
Time Left: 83d 19h 24m
Assorted Bridgestone Parts

Price: $0.00
Date: 10/16/2018 11:09 am
Time Left: 59d 19h 12m
BS 350 Carburetors (2nd. Set)(SOLD)

Price: $0.00
Date: 10/04/2018 04:52 pm
Time Left: 48d 0h 55m
1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 29d 15h 17m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal