Author Topic: New member  (Read 523 times)

0 Members and 1 Guest are viewing this topic.

Offline ascot

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
New member
« on: March 16, 2017, 02:14:13 PM »
Hi,

Last fall I picked up two 175's in the hopes that I could bring one to life.

I want to send the cylinders to Millennium Tech for NSC plating.  They want me to advise the piston clearance that I want them to work to.

The Bridgestone service manual shows .0015-.0025 on Page 29 and .001-.003 on page 80.

What should I ask for?


Offline srpackrat49

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 134
Re: New member
« Reply #1 on: March 16, 2017, 02:55:31 PM »
Maybe get new ones from richard first..... ;D   and go from there.... just my 2 $  how bad are the jugs now??????

Offline slawsonb

  • Trade Count: (0)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 1350
Re: New member
« Reply #2 on: March 16, 2017, 03:14:36 PM »
When I had them plate my 350 cylinders, I sent the pistons I intend to use along with the cylinders and they determined the clearance. You might want to ask about that approach. Welcome to the site.
...bert

Offline ascot

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Re: New member
« Reply #3 on: March 16, 2017, 04:09:27 PM »
The jugs are in relatively good shape and I purchased new pistons & rings from Richard.

Millennium has a form that they want sent in with the order and on it they ask for the desired clearance.

I am thinking .0020" but was hoping that someone from the forum had first hand experience.

Thanks for the comments.

Offline OldSwartout

  • Global Moderator
  • Trade Count: (0)
  • *******
  • Posts: 953
Re: New member
« Reply #4 on: March 16, 2017, 08:08:16 PM »
The .002" is correct for nominal, they'll need the range .0015-.0025" to work to. Machining work isn't exact although they'll come close.
Karl Swartout
Mooresville, IN
BS175 Roadracer
BS350 GTR

Offline ascot

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Re: New member
« Reply #5 on: March 17, 2017, 07:01:46 AM »
Thanks for the help.

I will go with the .002"
 

 


Gallery


Views:9
Comments (0)
By: OldSwartout

Views:22
Comments (2)
By: AlanJohn

Views:21
Comments (0)
By: AlanJohn

Views:24
Comments (0)
By: AlanJohn

Classifieds

GTO seat
Date: 10/18/2017 01:22 pm
Time Left: 89d 2h 49m
350 gtr parts bike
Price: $0.00
Date: 10/03/2017 09:06 am
Time Left: 73d 22h 34m
Surfrider 7 50cc Motorcycle For Sale - SOLD

Price: $175.00
Date: 09/29/2017 10:43 am
Time Left: 70d 0h 10m
****

Price: $0.00
Date: 09/14/2017 01:44 pm
Time Left: 55d 3h 11m

Recent Downloads added

How to build a 149 mph 350GTR....
Rating: (None)
Filesize: 7154.56KB
Date: April 18, 2017, 08:25:38 AM
Bridgestone 100 Sport Brochure
Rating: *****
Filesize: 937.72KB
Date: July 08, 2015, 12:58:53 PM
BS 100 Sport Australian Brochure
Rating: *****
Filesize: 937.53KB
Date: June 29, 2015, 06:40:40 PM
Bridgestone 350 GTO - Moto L├ęgende May 2003
Rating: *****
Filesize: 9429.41KB
Date: April 22, 2015, 04:18:43 PM

Powered by EzPortal