Author Topic: Where does this 175 part go?  (Read 101 times)

0 Members and 1 Guest are viewing this topic.

Offline hgzumanity

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Where does this 175 part go?
« on: August 14, 2018, 06:31:11 PM »
Can anyone tell me where this piece goes?  It fell out when I took the clutch cover off. I have looked through the parts book and service manual and I don’t know where it came from. Thanks

Offline simonhk

  • Trade Count: (0)
  • New Member
  • *
  • Posts: 3
Re: Where does this 175 part go?
« Reply #1 on: August 14, 2018, 09:12:39 PM »
it goes in the outer  cover in the clutch actuating mechanism

Offline hgzumanity

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re: Where does this 175 part go?
« Reply #2 on: August 14, 2018, 09:19:30 PM »
Thanks for the reply. I just looked at my clutch cover and that piece is still where it belongs. This metal dowel is quite a bit bigger than that one. Do you have any other ideas?

Offline bsforever

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 161
Re: Where does this 175 part go?
« Reply #3 on: August 15, 2018, 12:12:34 AM »
I am not familiar with the 175's so any answer i guess at is just that.... a guess. Any possibilty it is a dowel pin that holds the cover onto the engine?  Might be too big for that , but just a shot-in-the-dark guess.

Offline al_pritchard

  • Trade Count: (0)
  • Full Bridgestone Member
  • ***
  • Posts: 80
Re: Where does this 175 part go?
« Reply #4 on: August 15, 2018, 09:48:35 AM »


Look in the lower right corner of the case in the image below. Could it be that pin? I think it’s the fork guide pin PN: 2113-8000. I haven’t seen any pin in the engine that big, other than that.

If thats the pin, for the life of me I can’t think of how it would migrate to the clutch side.

Al Pritchard
Highlands, NJ

BS175 Racer

Offline hgzumanity

  • Trade Count: (0)
  • Registered Bridgestone Member
  • **
  • Posts: 21
Re: Where does this 175 part go?
« Reply #5 on: August 15, 2018, 12:52:58 PM »
I believe you are right, Al. Thanks for the picture. My guess is it fell out into the bottom of the crank case and rolled through the hole at the bottom of the case between the gearbox and clutch area. I was hoping I wouldn't have to split the cases on this engine but maybe this is why the bike was parked in the first place. Thanks again

 


Gallery


Views:10
Comments (0)
By: rwgibbon

Views:13
Comments (0)
By: rwgibbon

Views:11
Comments (0)
By: rwgibbon

Views:54
Comments (1)
By: killerterp

Classifieds

1966 DT 175

Price: $1900.00
Date: 09/16/2018 07:14 am
Time Left: 87d 13h 40m
Bridgestone Jacket XL

Price: $0.00
Date: 09/08/2018 01:25 pm
Time Left: 79d 19h 51m
SOLD

Price: $0.00
Date: 09/04/2018 09:18 pm
Time Left: 76d 3h 44m
bridgestone tires
Date: 08/29/2018 05:24 pm
Time Left: 69d 23h 50m

Recent Downloads added

11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 92.56KB
Date: August 03, 2018, 02:49:08 AM
11/01/1967 Factory Service Letter, RH shift/LH Brake conversion

Rating: (None)
Filesize: 142.24KB
Date: August 03, 2018, 02:44:36 AM
350 GTR Wiring Diagram
Rating: *****
Filesize: 8604.23KB
Date: July 29, 2018, 12:29:25 PM
Bridgestone Motorcycles

Rating: (None)
Filesize: 3561.91KB
Date: June 05, 2018, 04:42:13 PM

Powered by EzPortal