Author Topic: 175 Changes  (Read 4409 times)

0 Members and 1 Guest are viewing this topic.

Dave K

  • Guest
  • Trade Count: (0)
175 Changes
« on: July 13, 2010, 11:07:41 AM »
At Mid-Ohio I was in an interesting discussion about some of the differences in the 175 line. I had noted that my bike (ser. no. 16L21087) and my brothers bike (16M22934), had a more rounded front fender than the others that were present at Mid-Ohio. So it lead me to reach for my research material when I got home. I did find some interesting documentation based on the parts book. According to the parts book for 175 DT, 175 HS, M11 RS and M11 SS, many changes seemed to have take place around the 16K, ser. no area. Front fender and front fender stays changed as the machines before 16K had different front fenders and stays, then bikes after 16K. The same thing happened to the oil tanks. Before 16K the oil tank was under the fuel tank which also had the fuel tank that was different at the front of the fuel tank to accommodate the filler for the oil tank. After 16K what is listed is the oil tank at the side. No mention is made as to whether it is only DT's or HS's that had the change to the oil tanks. I do know if one is to look at the brochures and road tests of the time, such as Cycle Worlds Jan. 1967 road test of the 175 HS and the brochure "Bridgestone--the Lion Hearted are Here", you will see both models of 175's with the oil tank clearly under the fuel tank and not on the side. I am though always cautious to use brochures and road tests as "fact" as many times they are preproduction models and they may have minor differences than actual delivered bikes. But the parts books, reflect the changes. Even though the parts books uses the changes of some items as bikes before 16K and after 16K, there is probably some minor over lap, as inventory of parts are used up. Other cosmetic changes took place after 16K. Rear fender, tool box, left cover (battery cover) and air cleaner. I have noticed where my rear wheel sprocket is a 4 bolt sprocket as my bike is 16L and my brothers 16M bike has a 6 bolt sprocket and the that the parts book reveals that a change took place at that time starting with 16M getting a different rear hub.

We all know that in production of any product, that to make a profit, the product must reach the consumer. So some items can't be as absolutes, to get the product to the showroom for sale.

I hope I didn't boar anyone with this long post.

IrishWheelee

  • Guest
  • Trade Count: (0)
Re: 175 Changes
« Reply #1 on: December 27, 2014, 08:40:44 PM »
Hi Dave
You may be able to help me. I have a TAS 1 23 which is a 200 which has the 6 hole sprocket, and the later hub. Would you be able to help me with the axle. I am not sure if I am missing something. Could you photograph your Axle at the sprocket side and the brake side from the rear so I can see what spacers are in use. It would be a great help to me?

many thanks

Pat

Offline rwgibbon

  • Trade Count: (2)
  • Master Registered Bridgestone Member
  • *****
  • Posts: 578
  • 1968 BS 350 GTR
Re: 175 Changes
« Reply #2 on: December 28, 2014, 09:21:04 AM »
Dave,

If you look at the detailed parts manual that is posted on this site
you should be able to tell if you are missing a spacer.

Randy

IrishWheelee

  • Guest
  • Trade Count: (0)
Re: 175 Changes
« Reply #3 on: February 09, 2015, 10:57:17 AM »
Hi Randy

the parts manual shows lots of other parts but I believe this is for the 175 which had an axle change before it became the 200 so it is confusing,

Thanks anyway

Pat

66DT175

  • Guest
  • Trade Count: (0)
Re: 175 Changes
« Reply #4 on: February 10, 2015, 06:23:41 PM »
Not boring at all, actually is interesting stuff. My '66 DT was built in May '66 and has the oil reservoir under the fuel tank, also known as the "front oil tank" model. These models as you indicate probably changed for cost reasons and are more desirable than side oil tank models.

Offline dcr

  • Trade Count: (0)
  • Expert Registered Bridgestone Member
  • ****
  • Posts: 459
Re: 175 Changes
« Reply #5 on: March 06, 2015, 08:49:27 PM »
I just noticed that my 66 brake light switch has a screw that attaches the lever. At some point that changed to a nut. Wonder when that changed?
1966 175 DT and 1968 350 GTR

 


Gallery


Views:221
Comments (0)
By: Jon West

Views:1363
Comments (0)
By: rwgibbon

Views:1692
Comments (0)
By: Perry L Anderson

Views:1757
Comments (0)
By: Perry L Anderson

Classifieds

Gto
Date: 03/02/2024 06:49 am
Time Left:
Looking for a BS90 used or new luggage Carrier assembly

Date: 02/01/2024 04:19 pm
Time Left:
Gto
Date: 10/19/2023 01:08 pm
Time Left:
Urgent - l/end roller bearing & piston pins needed
Date: 10/08/2023 03:25 am
Time Left:

Recent Downloads added

Chibi, Chibi Deluxe, Tora Service Manual
Rating: (None)
Filesize: 20383.27KB
Date: May 01, 2023, 08:35:39 PM
Chibi_Tora_Parts_Manual
Rating: (None)
Filesize: 14301.44KB
Date: May 01, 2023, 08:25:53 PM
BS200 Mk II RS & MK II SS Exclusive Parts
Rating: (None)
Filesize: 358.29KB
Date: March 07, 2021, 07:30:10 PM
1970 sales brochure
Rating: *****
Filesize: 6753.33KB
Date: July 16, 2020, 10:01:18 PM

Powered by EzPortal